M-audio BX5 Carbon Studio Monitor
Key Features
- 5″ Woven Kevlar Woofer
- 1″ Silk Dome Tweeter
- Class-AB Amplification
- 40W of LF Power, 30W of HF Power
- Waveguide with LED Placement Cues
- Acoustic Space Control
- 56 Hz to 22 kHz Frequency Response
- XLR and 1/4″ TRS Input Connectors
- Multiple Points of Protection
KSh 35,000.00
Description
M-Audio BX5CARBON Overview
The silver and black M-Audio BX5 Carbon is a 5″ 2-way 70W active studio monitor that can be used for home studio recording and mixing. The monitor utilizes a 40W powered 5″ Kevlar woven woofer and a 30W powered 1″ silk dome tweeter to deliver a frequency response of 56 Hz to 22 kHz with a signal-to-noise ratio of 100 dB.
The monitor’s Class-AB amplifier helps provide a flat frequency response with low noise to enable you to mix a wide variety of modern music styles. The tweeter output is sent through a waveguide to improve stereo imaging and pinhole mounted LED placement cues can help you place the monitor in relation to the optimal listening position.
A 3-way switch on the back of the unit allows the response of the monitor to be adjusted to different acoustic environments such as bedroom home studios or professionally treated facilities. Both XLR 3-pin and 1/4″ TRS inputs are available for connection to your audio interface. The BX5 Carbon features protection against RF interference, output current limiting, a subsonic filter, and more.
Flat Frequency Response
Kevlar Low Frequency Driver
Class-AB Bi-Amp
Acoustic Space Control
Waveguide with LED Placement Cues
M-Audio BX5CARBONXUS Specs
| Type | 2-way active near-field studio reference monitor |
| LF Driver Size | 5″ / 127 mm Kevlar curved cone with high-temperature, magnetically shielded voice coil and damped rubber surround |
| HF Driver Size | 1″ / 25 mm magnetically shielded natural silk dome |
| Frequency Response | 56 Hz to 22 kHz |
| Crossover Frequency | 2.8 kHz |
| LF Amplifier | 40 W |
| HF Amplifier | 30 W |
| Signal to Noise Ratio | 100 dB typical, A-weighted |
| Input Connectors | 1 x XLR 3-pin balanced input 1 x 1/4″ TRS balanced/unbalanced input |
| Polarity | Positive signal at + input produces outward LF cone displacement |
| Input Impedance | 20 kOhms balanced 10 kOhms unbalanced |
| Input Sensitivity | 85 mV pink noise produces 90 dBA output SPL at 1 meter with volume control at maximum |
| Protection | RF interference Output current limiting Over temperature Turn on/off transient Subsonic filter External mains fuse |
| Indicators | Power on/off indicator on rear panel |
| Power Requirements | Factory-programmed for 115 VAC ~50/60 Hz, 230 VAC ~50/60 Hz, or 100 VAC ~50/60 Hz |
| Cabinet | Vinyl-laminated high-acoustic-efficiency MDF |
| Dimensions | 9.8 x 6.9 x 7.9″ / 250 x 176 x 200 mm |
| Weight | 11 lb / 5 kg |
| Package Weight | 12.85 lb |
| Box Dimensions (LxWxH) | 14.1 x 12.1 x 10.5″ |
Customer Reviews
Related Products
KRK Rokit 4 Generation 3 Two-Way Active Monitor
Order This Via WhatsAppConfiguration:2-Way
System type:Active Studio Monitor
MF/HF Cone Material:Aramid Glass Composite Woofer
LF Transducer:4″ Aramid Glass Composite Woofer
Frequency Range (-10dB):51Hz – 35kHz
Crossover Frequency:2.3kHz
Total Power:30 Watts
HF Power:10 Watts
LF Power:20 Watts
Peak SPL:100 Watts
Auto-Standby:30 Minutes
Cabinet Material:MDF
Input Connectors:
Unbalanced 7kΩ RCA
Balanced 10kΩ ¼” TRS and XLR. Pin 2 & Tip = Hot\Positive, Pin 3 & Ring = Cold\Negative
M-audio BX5D2 Studio Monitor
Order This Via WhatsAppThe M-Audio® BX studio monitor series is trusted by more musicians and recording professionals than any other. Now, the BX5 D2 monitors extend the bestsellers’ legacy* with an elegant new design inside and out. We leveraged technology from our high-end monitors to extend the frequency response and provide an even more natural listening experience. Custom Class A/B analog amplifiers deliver superior dynamics and tonal accuracy across the frequency spectrum—while the latest-generation woven Kevlar low-frequency drivers and waveguide-loaded silk dome tweeters provide rich, defined sound. With the BX5 D2, you’ll enjoy the utmost accuracy in an engaging listening experience.
M-audio BX6 Carbon studio Monitor
Order This Via WhatsAppM-Audio BX6 Carbon Compact studio monitors
The M-Audio BX-6 Carbon is an active studio monitor featuring a 6” woven Kevlar woofer, 1.25” silk-dome tweeter, a bi-amplified 130 watt class A/B design and a unique Acoustic Space Control feature that lets you calibrate the monitor to your mixing environment.
PreSonus Eris E8 XT Studio Monitor
Order This Via WhatsAppPreSonus Eris E8 XT Studio Monitor
The PreSonus Eris E8 XT Monitor is a powerful and accurate studio monitor designed for professional audio production. With its extended frequency response, robust construction, and flexible connectivity options, it delivers precise and detailed sound reproduction for critical listening and mixing applications.
